U.S. Power Sector’s Use Of Water Continued Downward Trend

The U.S. electric power sector’s cooling water withdrawals fell 10.5% from 53.1 trillion gallons in 2019 to 47.5 trillion gallons in 2020, continuing the downward trend in withdrawals, the U.S. Energy Information Administration (EIA) reported on Dec.17.

The decline has been driven by the increased use of renewable and natural gas-fired generation in place of coal-fired generation, as well as less use of once-through cooling technologies, EIA noted.

As the fuel mix has shifted to less water-intensive energy sources, the water intensity of U.S. power generation — the average amount of water withdrawn per unit of electricity generated — has declined from 14,928 gallons per megawatt hour (gal/MWh) in 2015 to 11,857 gal/MWh in 2020, EIA said.

It noted that thermoelectric power plants — including coal, nuclear, and natural gas plants — boil water to create steam, which then spins a turbine to generate electricity. Cooling water is passed through the steam leaving the turbine to cool and condense the steam. This step reduces the steam’s exit pressure and recaptures its heat, which is then used to preheat fluid entering the boiler.

According to EIA, U.S. thermoelectric plants are the largest source of U.S. water withdrawals, accounting for more than 40% of total U.S. water withdrawals in 2015.

The changing U.S. electricity generation mix accounts for approximately 80% of the downward trend in water withdrawals by the electric power sector.

EIA noted that natural gas-fired generation uses a more energy-efficient technology to produce electricity than coal and has a lower water withdrawal intensity than coal. Natural gas combined-cycle generation had an average water withdrawal intensity of 2,793 gal/MWh in 2020, compared with 21,406 gal/MWh for coal.

The share of renewable generation, which on average has a very low water withdrawal intensity, also significantly increased from 2015 to 2020.

The remaining 20% of water withdrawal reductions came from the reduced use of once-through cooling systems.